Instrument Tray Liner White Sheet, Sterimed, 500*250 mm

The Instrument Tray Liner by Sterimed is a high-performance medical component fabricated from 100% cellulose, specifically engineered for instrument protection and the prevention of "wet pack" occurrences. These liners serve as a critical moisture management tool by absorbing excessive condensation during steam sterilization, thereby mitigating the risk of microbial transfer and contamination associated with residual fluids. The 500x250 mm white sheet configuration provides a standardized surface area for procedure trays, ensuring a reliable sterile barrier interface that complies with EN ISO 11607-1 requirements for terminally sterilized medical devices.

Features:

• Superior Absorbency Profile: Delivers a guaranteed water absorbency rate of 250%, effectively eliminating moisture that could otherwise necessitate the rejection and reprocessing of surgical trays.
• Optimized Material Composition: Consists of 100% cellulose material to balance fluid uptake with structural integrity.
• Mechanical Resilience: Exhibits high tensile strength in both the machine direction (2.7 kN/m) and cross direction (1.4 kN/m), providing resistance against transportation and handling stress.  
  
•  Sterilization Compatibility: Validated for use in professional steam sterilization cycles and intended for placement either inside (below instruments) or beneath procedure trays before sterilization packaging is applied.
• Regulatory Standard Compliance: Meets the rigorous requirements of EN ISO 11607-1 for materials used in packaging for terminally sterilized medical devices.
• Extended Shelf Stability: Guaranteed for a shelf life of 5 years when maintained in dry, ventilated conditions between 10∘C and 40∘C.
• Safe Disposal Protocol: Designed for efficient waste management through incineration according to local clinical regulations after use.